Chamber Reamer+Combo Rifling button-357MAGNUM

$110.00

Categories: ,
0 out of 5 based on 0 customer ratings
(0 customer reviews)

Description

Hello dear buyer!We sell a complete set for the manufacture of the barrel.He has the reamer for the chamber and a button for cutting the barrel.The button has two heads.The first rifle,the second calibration,so you do not need additional calibration buttons,the button has 6 thread

Twist button 476 mm hardness of the button 65 units.
we can also make your measurements under the order. in the photo there is an example of work by our tool.
Do not overpay, buy a good and working tool.
Dear friends, please pay attention to the fact that our profile on ebay deals exclusively with the sale of buttons, and all reviews are not hidden and you can read about them with respect to each instrument.

Now a few facts why a real button can not cost less than $ 45-50
1). A good alloy for the production of one button costs from 10 to 15 $
2). Each button is made manually with an accuracy of 0.01mm
3) Our instrument is one of the only ones that is not manufactured in China and has been certified, and complies with all international standards.

One and the same button does not apply to all calibres of the same size as China sells, for example, there can not be one 9mm button, since 9mm calibers are many 9×19, 9×18,9×17 and all buttons have different tolerances and different angles.
4) Yes you can pay $ 20 less but you will lose your time, month for delivery and the result of the work will be incorrect

Good shopping friends
Recommendations for using the button.
Recommended steel grades for working with a button;
Germany( DIN,WNr) 1.7223,41CrMo4;
France( AFNOR) 42CD4TS ;
Spain( UNE) 42CrMo4;
England ( BS) 708M40;
USA 4140,4142

Also very important is the thickness of the workpiece!
Each wall of the workpiece before using the button should be 1.5-2.0 diameter bullets
An example of calculating the diameter of the workpiece for the caliber 9mm Luger
9.02 (bullet diameter) * 1.5 = 13.53 minimum thickness of one wall
13.53 + 13.53 + 9.02 = 36.08 The minimum rod diameter for this caliber

Reviews

There are no reviews yet.

Be the first to review “Chamber Reamer+Combo Rifling button-357MAGNUM”

Your email address will not be published. Required fields are marked *